How to Install Your Own Frame

Tools & Materials Needed:

• Measuring tape
• Level
• Pencil
• Hammer
• Drill (if needed)
• Wall anchors (if needed)
• Picture hooks or nails
• Hanging wire (if applicable)

Step-by-Step Installation:

Step 1: Choose the Placement

1. Determine where you want to hang your frame.
2. Use a measuring tape to find the center of the space.
3. Mark the desired height lightly with a pencil. A common rule is to position the center of the frame at eye level (around 57-60 inches from the floor).

Step 2: Measure & Mark

1. Measure the distance from the top of the frame to the hanging hardware (hook, wire, or D-rings).
2. Mark the location on the wall where the hardware should be installed.
3. Use a level to ensure the marks are straight.

Step 3: Install Wall Hardware

1. If using nails or hooks, hammer them into the marked spots.
2. For heavier frames, use wall anchors or screws with a drill to provide extra support.
3. If using a wire, ensure it has some slack but is not too loose.

Step 4: Hang the Frame

1. Carefully lift and place the frame onto the installed hooks or nails.
2. Use a level to check for straightness.
3. Adjust as necessary by shifting the frame slightly.

Step 5: Final Check

1. Step back and inspect the frame’s positioning.
2. If needed, make small adjustments.
3. Ensure the frame is securely attached to prevent shifting or falling.

Tips for Best Results:

• Use two hooks for larger frames to ensure even weight distribution.
• For gallery walls, lay out the arrangement on the floor first.
• If hanging above furniture, leave at least 6-8 inches of space between the frame and the furniture surface.

Enjoy your beautifully framed artwork!